Yamaha PLG100 Manuale del Proprietario Scaricare il pdf (Pagina 27)

ENGLISH

• Connection Between WX-series and “mother” tone generator/sound card

4. Breath Control ............................Settings: BC (Breath Control), Exp (Expression)

Specifies the MIDI control change number to be used for breath control when breath

control is applied from a breath controller or WX-series Wind MIDI Controller. When

“BC” is selected control change number “02” (breath control) is used for breath con-

trol. When “Exp” is selected control change number “11” (expression) is used for

breath control.

• This parameter is also available for the breath controller data transmitted from a device other than the WX-

series.

• This parameter is effective only when “BC/WX” is selected from Breath Mode.

5. Breath Curve............................................................................. Setting: -16 … +16

Determines the relationship between breath control data received from a breath con-

troller, WX-series Wind MIDI Controller (via the BT7 and MIDI IN connector), and

the actual amount of breath variation applied. Minus settings result in a large breath

variation with a relatively small amount of breath pressure applied to the controller,

while plus settings required a greater range of input breath control values to produce

the same degree of breath variation.

• This parameter is also available for the breath controller data transmitted from the device other than WX-

series.

• The settings made here is effective only when “BC/WX” is selected from Breath Mode.

• When you use a sound card built into PC...

To control PLG100-VL using WX-series Wind Controller, select “SW1000 #1 Synthesizer” for the

MIDI Thru setting in the System Setup dialog of the “XGworks.”

WX5

BT7

MIDI

OUT

MU100R

WX IN

VL System Parameters

MIDI

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Nessun commento

Yamaha PLG100 Manuale del Proprietario Pagina 27