Yamaha F150 Manuale di Servizio Scaricare il pdf (Pagina 237)

63P3F11

7-28

1

2

3

4

5

6

7

8

9

NOTE:

Hold the power trim and tilt unit with one

hand, and pull the upper mount shaft out at a

downward angle with the other.

6. Remove the collars.

Checking the hydraulic pressure

1. Remove the reservoir cap, and then

check the fluid level in the reservoir.

NOTE:

If the fluid is at the correct level, the fluid

should overflow out of the filler hole when the

reservoir cap is removed.

2. If necessary, add sufficient fluid of the

recommended type until it overflows out

of the filler hole.

3. Install the reservoir cap, and then tighten

it to the specified torque.

4. Fully extend the trim and tilt rams.

5. Remove the circlip

1

, then the manual

valve

2

.

6. Install the up relief fitting

3

and hydraulic

pressure gauge

4

.

NOTE:

Quickly install the special service tools before

any fluid flows out of the hole.

S60X7120

S60X7340

Recommended power trim and tilt

fluid:

ATF Dexron

II

T

R

.

.

Reservoir cap:

0.7 N·m (0.07 kgf·m, 0.5 ft·lb)

Up relief fitting

3

: 90890-06773

Hydraulic pressure gauge

4

:

90890-06776

Power trim and tilt unit

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 312 313

Commenti su questo manuale

Nessun commento