Yamaha Amp Editor Manuale del Proprietario Scaricare il pdf (Pagina 88)

Chapter 5 Main panel window

Amp Editor Owner’s Manual

 Recovery Update

If necessary, you can recover the firmware of a device. If the power turns off while a firmware update is being

executed, the firmware will become unbootable; if this occurs, use Recovery Update to recover.

• Before you continue, you’ll need to download the firmware that you want to use for the recovery update

and the firmware that you want to use for the firmware update, and decompress the compressed file.

1. Power-on the device.

2. Using the “Network Setup” dialog box (page 91) or a DHCP server, assign an IP address

to the device.

3. Click the [Device] menu item [Firmware Update]  [Recovery Update...].

A folder selection dialog box will appear.

4. Select the folder that contains the update file, and click the [OK] button.

The “Recovery Update” dialog box will appear. The name of the device connected offline, the current

firmware version, and the IP address will be displayed.

5. Select the check box of the device that you want to recover.

If you click the [Select All] button, all devices will be selected. If you click the [Clear All] button, the

check boxes of all devices will be cleared.

6. Click the [Update] button.

The firmware recovery will begin.

• Do not disconnect the Ethernet cable or power-off the devices while the recovery is pro-

ceeding.

7. When the recovery is completed, execute Firmware Update (page 86) in order to recover

the data other than the firmware.

NOTE

CAUTION

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 210 211

Nessun commento

Yamaha Amp Editor Manuale del Proprietario Pagina 88